Wording of the point calculation:

1. place 25 points 11. place 10 points
2. place 22 points 12. place 9 points
3. place 20 points 13. place 8 points
4. place 18 points 14. place 7 points
5. place 16 points 15. place 6 points
6. place 15 points 16. place 5 points
7. place 14 points 17. place 4 points
8. place 13 points 18. place 3 points
9. place 12 points 19. place 2 points
10.place 11 punkti 20.koht 1 point

NB! Hit counts and the driver will place points when the distance 50% running the length of the. Less than half of the race are passed 0 points.

Total considers the trips, which is the name of the step under the.

KOHTUNIKEGA EI VAIELDA .VÕIB JÄRGNEDA KARISTUS

Judges have a right CHECK (ENGINE ALSO OPEN TO) At each stage three arbitrary ENGINE COMPETITOR. The renunciation is equivalent to an entire season DISKLAHVIGA.
LOOKS also possible to lodge a protest with the price of 35 EUR.


Võistlusklassid ORIGINAAL, STANDARD -25a, +25a, OPEN, HIINAKAS, BASKETS.
MUUDATUS Kõikide klasside masinatel (Va. külgkorvid)must have two brakes, both the front and rear.

Tüdrukute klassis sõidavad naissoost isiksused vene standard ,The original and the independent origin of Chinese standard class võrriga.

100 kg.+ klass: In this class, you can run on standard, Original and HIINAKA class võrriga. The competitor must consider the clothes (in the form of non-driving )at least 100 kg and the two previous years who have not been in front of the trio in another class. At the beginning of the race day registration weigh.


Original Class:(common rules for the duration of the original class)

d4 engine, d5, d6, d8 and (Russian origin) Modifications.
Required – factory crankcase, ja cylinder silindripea, carburettor, blast tube with a silencer.
Forse Call – entering the engine is forced prohibited except. Reducing the volume of the combustion chamber, (The diameter of the piston must be 38,5 mm-ni, this box is checked some technical matter). The piston is forced to change the stroke or may not be. One of the piston ring for the pin allowed.
Karburaator -Carburetor originaal.Õhupuhasti free
Issue – Factory blast tube length of min.20 cm. (the attachment of the cylinder can be replaced by a spring,clamp, etc.). The damper must be in the original or modifications must meet Võrri D series, Võrri original silencers, may not be out of the cut, truncated. Permitted removal of sieves, welding, fastening structures, Rolled edge points are allowed to be welded. Adding any prohibited material in the silencer.
Ignition – originaal, Changing the camshaft profile and contact topeltvedrud prohibited. Coil and kondekas free.
Transfer – fikseeritud ülekandesuhe(kett). Cranks or jalapulk (Moving to or otspehmendustega).
WindowVõrri original frame (sh. fork / suspension, leistangid, paak, fenders except. Sadul), the addition of reinforcements. Allowed Pori tables shorten, approval ways to modify and add guards of. Required license plate in front of u. 200x200mm. This number must be legible.
Wheels19″, 26″ Võrri origin wheels
Kummid – free, naelad, ketid yeah MUU cylinder ulatuv metall on keelatud.
Pidurid – required for each wheel brake pedal ( the technical condition of the box is checked).
Other - Lisajahutussüsteemid and power supplies to power the ignition system of a prohibited.
Driver equipment - The helmet( lõuakaitsmega),gloves and boots, which are over the ankle ( can be used in winter boots with a height of at least 17 cm.kohustuslik.


Standard class:(common rules for the duration of the sport class)

d4 engine, d5, d6, d8 and (Russian origin) Modifications.
Required – factory crankcase, ja cylinder silindripea, carburettor ,blast tube with a silencer.
Forse Call
– free, are permitted within the engine is forced, (The diameter of the piston must be 38,5 mm-ni, this box is checked some technical matter). The stroke must not be changed.
Karburaator -Carburetor original .Õhupuhasti free
Issue – T
ehase blast tube length min.20 cm. (the attachment of the cylinder can be replaced by a spring,clamp, etc.). The damper must be in the original or modifications must meet Võrri D series, Võrri original silencers, may not be out of the cut, truncated. Permitted removal of sieves, welding, fastening structures, Rolled edge points are allowed to be welded. Adding any prohibited material in the silencer.
Ignition – free
Transfer – fikseeritud ülekandesuhe(kett).
Window, Castersfree (frame of the bicycle is prohibited), the required license plate in front of u. 200x200mm. This number must be legible.
Kummid – free, naelad, ketid yeah MUU cylinder ulatuv metall on keelatud.
Pidurid – required for each wheel brake pedal ( the technical condition of the box is checked).
Driver equipment - The helmet( lõuakaitsmega),gloves and boots, which are over the ankle ( can be used in winter boots with a height of at least 17 cm.kohustuslik.


Open:
d4 engine, d5, d6, d8 and Chinese origin säärude 50cc these modifications.
Required – factory crankcase and cylinder, allowed the crankcase, the external shape of the second type of modified intake and ignition systems for installation. Permitted water-cooled tehasesilindri ( d10-ne, and the original was bred at the water jacket which is an air-cooled cylinder with dimensions) use. Allowed to add extra cooling fins on the cylinder cooling fins that are attached onto põhiribide.
Russian origin 50cc:Forse Call – free, are permitted within the engine is forced, The diameter of the piston maximum of 38,5mm this box is checked in the technical. Stroke 40mm required.

Hiinakas 50cc:
(The following technical conditions for attending the Open class)
Forse Call – free, are permitted within the engine is forced, PISTON AND DIAMETER 40mm 38mm stroke.
Issue – free
Aircleaner – free
Ignition – free.
Transfer
fikseeritud ülekandesuhe(kett).
Window, Casters – free, the required license plate in front of u. 200 x 200mm. (the number of black and white base, or a black base and white number) This number must be legible, without lisailustusteta.
Kummid – free, naelad, Chains and other protruding metal prohibited.
Pidurid – required for each wheel brake pedal. ( the technical condition of the box is checked).
Driver equipment - The helmet( lõuakaitsmega),,gloves, and that is over the ankle boots ( can be used in winter boots with a height of at least 17 cm. kohustuslik.


Sidecars:50cc
d4 engine, d5, d6, d8 and their derivatives and 50 cc powered hiinaka.
Permitted use of a number of separate engine. Motors must not be allowed crankshaft- nor had the clutches connected together.
Required – factory crankcase and cylinder, allowed the crankcase, the external shape of the second type of modified intake and ignition systems for installation. Permitted water-cooled tehasesilindri (d10-ne, and the original was bred at the water jacket which is an air-cooled cylinder with dimensions) use. Allowed to add extra cooling fins on the cylinder cooling fins that are attached onto põhiribide.
Forse Call – free, are permitted within the engine is forced, The diameter of the piston maximum of 38,5mm. Stroke 40mm required.
Hiinakas 50cc forseering – free, are permitted within the engine is forced, PISTON AND DIAMETER 40mm 38mm stroke.
Karburaator – free.
Issue – free
Ignition – free.
Transfer – free.
Window, Casters – free, the required license plate in front of u. 200 x 200mm. (the number of black and white base, or a black base and white number) This number must be legible without lisailustusteta.
Kummid – free, naelad, Chains and other protruding metal prohibited.
Pidurid – require at least one wheel brake pedal.( the technical condition of the box is checked).
Required At least two people while driving. Basket dimensions of both the length of the,height and width of the free.
Driver equipment - The helmet(lõuakaitsmega),gloves,kohustuslik, and that is over the ankle boots ( can be used in winter boots with a height of at least 17 cm) kohustuslik.
Permitted while driving with one foot on the momentum pushing.


Külgkorv 80cc (Hiinakas):
Engine-made by Võrri engine in China.
Required-factory crankcase,ja cylinder silindripea,with the original carburetor air cleaner, (the items on the engine must remain the same as an original and)
BOOST-free,are permitted within the engine is forced,(The diameter of the piston must be an original 47mm and 40mm stroke)
Karburaator– must be included in the above-mentioned margile.Tehase kohustuslik.KARBURAATORI hood and cylinder manifold length MODIFICATIONS ALLOWED BETWEEN;DO NOT INCREASE.
Issue-free
Ignition-must be included in the above-mentioned marque.
Transfer-free
Window,Casters-free,the required license plate in front of u. 200mm-200mm.Number must be well-read.
Kummid-vaba.Naelad,Chains and other protruding metal is prohibited.
Pidurid-require at least one wheel brake pedal.(box is checked in the technical)

Driver equipment - The helmet( lõuakaitsmega),gloves and boots, which are over the ankle ( can be used in winter boots with a height of at least 17 cm.kohustuslik.
Driving time allowed momentum pushing with one foot


China Standard:
(The original Chinese Class)
engine -made by Võrri engine in China.
Required – factory crankcase, ja cylinder silindripea, carburetor with hood, blast tube with a silencer( the items on the engine must remain the same as an original and)
Forse Call – free, are permitted within the engine is forced, PISTON AND DIAMETER 40mm 38mm stroke.
Karburaator – must be included in the above-mentioned marque. Between the carburetor and cylinder manifolds (Changing the length of the intake manifold is allowed,because the frame does not fit well RIGA,does not increase)
Issue – Factory blast tube length must not be changed( Only the deflection). The damper must be in the original, or must conform to the engine as it is.

Aircleaner – free
Ignition – must be included in the above-mentioned marque.
Transfer – fikseeritud ülekandesuhe(kett).
Window, Casters – free, the required license plate in front of u. 200 x 200mm. (the number of black and white base, or a black base and white number) This number must be legible without lisailustusteta, Pedals allowed, can pipe through the frame.
Kummid – free, naelad, ketid yeah MUU cylinder ulatuv metall on keelatud.
Pidurid – required for each wheel brake pedal ( the technical condition of the box is checked).
Driver equipment - The helmet(lõuakaitsmega),,gloves, and that is over the ankle boots ( can be used in winter boots with a height of at least 17 cm.kohustuslik.


Technical box:
Since 2009 Since the competitions at the technical box. This work is organized contest organizer.
Technical box is located in a certain zone- (It is marked on the ground or in the lab will be announced).
The technical Võrri box is checked with the technical conditions:
Engine and engine parts are attached to it must comply with the terms of the relevant class. Number and size of the existence of. Brake good condition( both wheels must have brakes both front and rear) piston and engine size measurement.
Võrri süütekaane Removal, Measuring the size of the piston, and other technical matters, and non-compliance with the instructions of the control of the contest disable by owner, equal to the competitor's disqualification from the competition. Preferably, the competitor could be a personal box, candle key. (in its absence, we find a solution.)